-40%

Transfiguration Axia S MC Phono Cartridge - Made In Japan

$ 937.2

Availability: 100 in stock
  • Condition: New
  • Country/Region of Manufacture: Japan
  • Model: Transfiguration Axia S
  • Brand: Transfiguration
  • All returns accepted: ReturnsNotAccepted

    Description

    Transfiguration Axia S MC Phono Cartridge - Made In Japan. Condition is "New".
    The Axia S is a latest model Moving Coil Phono Cartridge "Made in Japan" by Transfiguration, replacing the much acclaimed Aria, and shares many of the features and much of the sound quality of its higher priced stablemates.
    Like all Transfiguration designs, the Axia S incorporates an ultra-tight magnet coil coupling. The coils aren't merely close; they're literally inside the ring magnet, with coil-magnetic proximity of only a few thousandths of an inch. With dynamic mass minimised and coil saturation eliminated, Transfiguration cartridges maintain extremely fast and accurate response to groove movements.
    "This is a very vivid and explict sounding cartridge, majoring on information... I compared the Axia to Transfiguration's Spirit 3 MC and found surprisingly little difference in the overall sound. Whereas the Spirit had a touch more openness, the Axia was marginally smoother on guitar or violin."
    - Hi-Fi World
    "The Axia's parts are of high quality. It's motor's coils operate within a double-ring magnet, which results in tight magnetic coupling and reduces mass. Attached to the coils is a 0.3mm diameter boron cantilever, to which is affixed an Ogura PA 3x 30um diamond stylus, a model used by a number of other cartridge manufacturers as well as in the Orpheus L, Transfigurations most expensive cartridge (00)."
    - Michael Fremer, Stereophile Magazine, May 2011
    Specifications:
    Output: 0.38 mV
    Weight: 7g
    Body: Aluminium, resonance controlled
    Cantilever: 0.3 mm diameter boron
    Stylus: Ogura PA (3 x 30 µm) solid diamond
    Magnet: Samarium cobalt
    Internal impedance: 10 Ohms
    Recommended load: Greater than 20 Ohms
    Recommended tracking force: 2.0 g